The new and improved 10” Bandsaw 10-3061 is a replacement of our previous 10-306 model. Numerous features make this bandsaw extremely easy to operate and make adjustments to the blade, guides and fence. The increased cutting capacity, 2 blade speeds, and increased 1/2HP motor are quite ample enough for smaller projects, and will be appreciated by
» Read More
This redesigned model includes a new 2-1/2” Dust Port which has been moved up from the base and is also now tilted upward 10°, so dust fittings will attach to it easier. The Door Hinges have been redesigned to make them sturdier to avoid breakage. Fence Carrier now has 4 additional plastic inserts in case fence tilt adjustments are needed. Rip Fence is supplied with a plastic pad on its end to allow the fence to slide easier. Lower bandsaw frame construction has been improved for positioning of the Lower Connecting Plate and Guide Assembly. Screws in the lower connecting plate have been changed for easier access with hex wrenches, if plate adjustment is needed. Upper bandsaw frame and guide assembly has been tweaked to ensure a consistent 5” maximum cutting height can be achieved.
» Read Less
|
NEW Redesign Features:
|
Standard Features:
|
NEW Redesign Features Include:
Standard Features:
| Product Info |  Model 10-3061: 10" Deluxe Bandsaw |
 Model 10-306: 10" Deluxe Bandsaw |
 Model 10-305: 10" Bandsaw |
|---|---|---|---|
| Sku | 10-3061 | 10-306 | 10-305 |
| Motor Horsepower | 1/2 HP | 1/2 HP | 1/3 HP |
| Motor Amps | 5.5 | 5.5 | 3.5 |
| Motor Volts | 115V, 60Hz | 115V, 60Hz | 115V, 60Hz |
| Blade Speed | (2) 1,515/ 3,280 ft/min | (2) 1,515/ 3,280 ft/min | 2,780 ft/min |
| Cutting Capacity Height | 5” | 5” | 4-5/8” |
| Cutting Capacity Width | 9-5/8” | 9-5/8” | 9-5/8” |
| Blade Width | 1/8” – 1/2” | 1/8” – 1/2” | 1/8” – 1/2” |
| Blade Length | 70-1/2” | 70-1/2” | 70-1/2” |
| Quick Release Blade Tension Lever | Yes | Yes | No |
| Table Size | 13-3/4” x 12-1/2” | 13-3/4” x 12-1/2” | 13-3/4” x 12-1/2” |
| Table Left Tilt | 5° | 5° | 0° |
| Table Right Tilt | 45° | 45° | 45° |
| Table Miter Gauge | 5/8” x 1/4” | 5/8” x 1/4” | 5/8” x 1/4” |
| Table Height to Floor | 39-7/8” | 39-7/8” | 39-7/8” |
| Table Height to Base | 14-1/2” | 14-1/2” | 14-1/2” |
| Table Fence Size | 12-1/4” x 2-3/8” | 12-1/4” x 2-3/8” | 13-1/2” x 1” x 2” |
| Blade Guide Type | Tool-less | Tool-less | Standard |
| Table Trunnion | Cast Aluminum | Cast Aluminum | Cast Aluminum |
| Overall Height | 34-1/4” | 34-1/4” | 33-1/4” |
| Overall Width | 21” | 21” | 21” |
| Overall Depth | 16-1/4” | 16-1/4” | 15-1/4” |
| Overall Base Size | 15-7/8” x 9-3/8” | 15-7/8” x 9-3/8” | 15-7/8” x 9-3/8” |
| Dust Port | 2-1/2” O.D., 2-5/16” I.D. | 2-1/2” O.D., 2-1/4” I.D. | 2-1/2” O.D., 2-1/4” I.D. |
| Overall Net Weight | 77.5 lbs. | 77.5 lbs. | 68 lbs. |
| Warranty | 5 Years | 5 Years | 5 Years |
No sell sheets found
| C10-393 | Table Insert for 10-305, 10-306 and 10-3061 ( 4-Pack) | $14.99 | Out of Stock | Add to cart |
| C10-990 | Drive Belt for 10-306, 10-3061 | $14.99 | Out of Stock | Add to cart |
| Motor Horsepower | 1/2 HP |
| Motor Amps | 5.5 |
| Motor Volts | 115V, 60Hz |
| Blade Speed | (2) 1,515/ 3,280 ft/min |
| Cutting Capacity Height | 5” |
| Cutting Capacity Width | 9-5/8” |
| Blade Width | 1/8” – 1/2” |
| Blade Length | 70-1/2” |
| Quick Release Blade Tension Lever | Yes |
| Table Size | 13-3/4” x 12-1/2” |
| Table Left Tilt | 5° |
| Table Right Tilt | 45° |
| Table Miter Gauge | 5/8” x 1/4” |
| Table Height to Floor | 39-7/8” |
| Table Height to Base | 14-1/2” |
| Table Fence Size | 12-1/4” x 2-3/8” |
| Blade Guide Type | Tool-less |
| Table Trunnion | Cast Aluminum |
| Overall Height | 34-1/4” |
| Overall Width | 21” |
| Overall Depth | 16-1/4” |
| Overall Base Size | 15-7/8” x 9-3/8” |
| Dust Port | 2-1/2” O.D., 2-5/16” I.D. |
| Overall Net Weight | 77.5 lbs. |
| Warranty | 5 Years |
